Yorkville Sound Elite Series 350W Powered 10-Inch Loudspeaker – E10P

The Yorkville Sound E10P is an advanced, compact two-way active loudspeaker designed for a wide variety of pro-audio applications. Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).

Product Specification? ?

HF Dispersion (°H x °V): 100 x 25

HF Protection: Peak and Average Limiting

LF Protection: Excursion, RMS

Cooling Scheme: Convection

Power Cable: Removable IEC

Power Switch: Yes

Power Consumption (typ/max): 120VA / 200VA

Inputs: 1 Combijack (XLR / 1/4-inch)

Input Impedance (Bal/UnBal): 4k ohms / 2k ohms

Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.35 at max

Level Controls: Gain

EQ Controls: Bass, Treble

Limiter: Peak and Average limiting on horn and woofer

LED Indicators: Power, Clip

Corners: Metal

Feet: Plastic Glides

Bar Handles: One Side

Flying Hardware: 5 (2 Top, 2 Bottom, 1 Pullback), 1/4″ Threading

Pole Mount Adapter (1 3/8″-3.5cm): Yes

Enclosure Materials: 15mm (5/8-inch) 11-ply Russian Birch

Port(s): Rear

Grille: Perforated Metal

Covering / Finish: Black Ozite (Carpet)

Dimensions (DWH xbackW, inches): 12 x 13 x 18.5 x 5.5

Dimensions (DWH xbackW, cm): 30 x 33 x 45 x 14

Weight (lbs/kg): 34 / 15.5